| |
Airolite’s Miami-Dade and Florida Building Code louvers are designed to meet the stringent criteria establish by the Florida Building Code. Miami-Dade and Florida Building Code louvers provide high volume flow rates, impact resistance, protection against water penetration and high wind-loads. Miami-Dade and Florida Building Code louvers are available in 5 and 6-inch frame depths.
K605MD Miami-Dade is a sightproof, horizontal, drainable head louver that serves a number of design requirements. The louver is 100% sightproof when viewed from any orientation or perspective, yields high free area, high air volume flow rates at moderate static pressure differential, and provides moderate protection against water infiltration.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
5” (127.0 mm)
|
| Blade: |
0.081” (2.06 mm)
|
| Frame: |
0.081” (2.06 mm)
|
| Test Standard: |
AMCA Standard 500-L
|
| Free Area - 4 ft. x 4 ft. unit:
|
8.31 ft² (0.77 m²)
|
| Percent Free Area: |
52%
|
| Beginning Point of Water Penetration: |
1,057 fpm (5.37 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
8,780 cfm (4.14 m³/s) |
Pressure Drop at
Beginning Point of Water Penetration: |
0.25 in. H2O (0.063 kPa)
|
| Miami-Dade County Protocols: |
|
• PA-201 Large and Small Missile Impact Test
• PA-202 Uniform Static Air Pressure Test
• PA-203 Cyclic Wind Pressure Test – Maximum Design Pressure
Rating +/- 110 PSF
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
SCV602MD is a sightproof, vertical blade, drainable louver that complies with the Florida Building Code and is Miami-Dade approved for use in the High Velocity Hurricane Zone for open building structure envelope protection or installations where the enclosed space is designed to accommodate water infiltration (wet rooms).
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
6” (152.4 mm)
|
| Blade: |
0.081” (2.06 mm)
|
| Frame: |
0.081” (2.06 mm)
|
| Test Standard: |
Wind
|
| Free Area - 4 ft. x 4 ft. unit: |
5.88 ft² (0.55 m²) |
| Percent Free Area: |
37%
|
| Beginning Point of Water Penetration: |
1,250 fpm (6.35 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
7,350 cfm (3.47 m³/s) |
Pressure Drop at
Beginning Point of Water Penetration: |
0.12 in. H2O (0.030 kPa)
|
| |
|
| Wind Driven Rain Water Penetration Test |
|
| Exterior Wind Velocity |
29 mph (13/ m/s) |
| Rainfall Rate |
3” (75 mm)/hr |
| Effectiveness |
99.4% |
| Core Ventilation |
693 fpm (3.5 m/s) |
| |
|
| Exterior Wind Velocity |
50 mph (22 m/s) |
| Rainfall Rate |
8” (200 mm)/hr |
| Effectiveness |
99.1% |
| Core Ventilation |
681 fpm (3.5 m/s) |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
SCV602MD/VCD-40 is a sightproof, vertical blade, drainable exterior louver with interior damper that complies with the Florida Building Code and is Miami-Dade approved for use in the High Velocity Hurricane Zone for closed building structure envelope protection or installations where the enclosed space incorporates no provision to accommodate water infiltration (dry rooms) at elevations up to 33-feet above grade; or, closed structures or installations where the enclosed space is designed to accommodate water penetration (wet rooms) at elevations greater than 33-feet above grade.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
10” (254 mm)
|
| Exterior Louver Blade & Frame: |
0.081” (2.06 mm)
|
| Interior Louver Blade & Frame: |
0.081” (2.06 mm)
|
| Test Standard: |
Wind Driven Rain |
| Free Area - 4 ft. x 4 ft. unit: |
5.88 ft² (0.55 m²) |
| Percent Free Area: |
37%
|
| Beginning Point of Water Penetration: |
1,250 fpm (6.35 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
7,350 cfm (3.47 m³/s) |
Pressure Drop at
Beginning Point of Water Penetration: |
0.12 in. H2O (0.030 kPa)
|
| |
|
| Wind Driven Rain Water Penetration Test |
| Exterior Wind Velocity |
29 mph (13/ m/s) |
| Rainfall Rate |
3” (75 mm)/hr |
| Effectiveness |
99.4% |
| Core Ventilation |
693 fpm (3.5 m/s) |
| |
|
| Exterior Wind Velocity |
50 mph (22 m/s) |
| Rainfall Rate |
8” (200 mm)/hr |
| Effectiveness |
99.1% |
| Core Ventilation |
681 fpm (3.5 m/s) |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
K6744X is a drainable louver certified by Underwriter's Laboratory under ASTM E 330, Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Uniform Static Air Pressure Difference, to comply with the requirements of the Florida Building Code. (Florida Product Approval No.: FL7708.1; UL Classified: R25376)
 |
Material: |
Extruded
Aluminum, Alloy 6063-T5
|
| Louver Depth: |
4”
(101.6 mm)
|
| Blade: |
0.081”
(2.06 mm)
|
| Frame: |
0.081”
(2.06 mm)
|
| Blade Angle: |
35º
|
| Test Standard: |
AMCA
Standard 500-L
|
| Free Area - 4 ft. x 4 ft. unit: |
8.98
ft² (0.84 m²)
|
| Percent Free Area: |
56%
|
| Beginning Point of Water Penetration: |
1,151
fpm (5.85 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
10,336
cfm (4.89 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.20
in. H2O (0.050 kPa)
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF) (DWG)
K6746MD is a drainable louver that is Florida Building Code approved for use in the High Velocity Hurricane Zone and Miami-Dade approved for installations where the enclosed space is designed to drain or otherwise accommodate water penetration (wet rooms). (Florida Product Approval No.: 10093; Miami-Dade NOA No.: 07-1015.07).
 |
Material: |
Extruded
Aluminum, Alloy 6063-T5
|
| Louver Depth: |
6”
(152.4 mm)
|
| Blade: |
0.081”
(2.06 mm)
|
| Frame: |
0.125”
(3.18 mm)
|
| Test Standard: |
AMCA
Standard 500-L
|
| Free Area - 4 ft. x 4 ft. unit: |
9.41
ft² (0.88 m²)
|
| Percent Free Area: |
59%
|
| Beginning Point of Water Penetration: |
1,250 fpm (6.35 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
11,762 cfm (5.56 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.20
in. H2O (0.050 kPa)
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF) (DWG)
K6746X is a drainable louver certified by Underwriter's Laboratory under ASTM E 330, Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Uniform Static Air Pressure Difference, to comply with the requirements of the Florida Building Code. (Florida Product Approval No.: FL7708.2; UL Classified: R25376)
 |
Material: |
Extruded
Aluminum, Alloy 6063-T5
|
| Louver Depth: |
6”
(152.4 mm)
|
| Blade: |
0.081”
(2.06 mm)
|
| Frame: |
0.081”
(2.06 mm)
|
| Blade Angle: |
35º
|
| Test Standard: |
AMCA
Standard 500-L
|
| Free Area - 4 ft. x 4 ft. unit: |
9.41
ft² (0.88 m²)
|
| Percent Free Area: |
59%
|
| Beginning Point of Water Penetration: |
1,250
fpm (6.35 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
11,762
cfm (5.56 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.20
in. H2O (0.050 kPa)
|
Maximum Qualified
Wind Design Load |
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF) (DWG)
SCH501X is a horizontal blade, Storm Class louver certified by Underwriter's Laboratory under ASTM E 330, Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Uniform Static Air Pressure Difference, to comply with the requirements of the Florida Building Code. (Florida Product Approval No.: FL7708.3; UL Classified: R25376)
 |
Material: |
Extruded
Aluminum, Alloy 6063-T5
|
| Louver Depth: |
5”
(127.0 mm)
|
| Blade: |
0.081”
(2.06 mm)
|
| Frame: |
0.081”
(2.06 mm)
|
| Test Standard: |
AMCA Standard 500-L |
| Water Penetration Test: |
Wind Driven Rain |
| Free Area - 4 ft. x 4 ft. unit: |
6.80
ft² (0.632 m²)
|
| Percent Free Area: |
43% |
| Beginning Point of Water Penetration: |
1,250
fpm (6.35 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
9,337
cfm (4.41 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.18
in. H2O (0.045 kPa)
|
| |
|
| Wind Driven Water Penetration Test |
| Exterior Wind Velocity: |
29 mph (13 m/s) |
| Rainfall Rate: |
3" (75 mm)/hr |
| Effectiveness: |
99.3% |
| Core Ventilation: |
876 fpm (4.5 m/s) |
| Exterior Wind Velocity: |
50 mph (22 m/s) |
| Rainfall Rate: |
8" (200 mm)/hr |
| Effectiveness: |
98.1% |
| Core Ventilation: |
138 fpm (0.7 m/s) |
Maximum Qualified
Wind Design Load |
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF) (DWG)
SCH601MD is a sightproof, horizontal blade Storm Class Louver that is Florida Building Code approved for use in the High Velocity Hurricane Zone and Miami-Dade approved for installations where the enclosed space is designed to drain or otherwise accommodate water penetration (wet rooms). (Florida Aproduct Approval N.:10093; Miami-Dade NOA No.: 06-0925.03)
 |
Material: |
Extruded
Aluminum, Alloy 6063-T5
|
| Louver Depth: |
6”
(152.4 mm)
|
| Blade: |
0.081”
(2.06 mm)
|
| Frame: |
0.081”
(2.06 mm)
|
| Test Standard: |
AMCA Standard 500-L |
| Free Area - 4 ft. x 4 ft. unit: |
7.58 ft² (0.704 m²) |
| Percent Free Area: |
47% |
| Beginning Point of Water Penetration: |
1,250
fpm (6.35 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
9,475
cfm (4.47 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.32
in. H2O (0.081 kPa)
|
| |
|
| Wind Driven Water Penetration Test |
| Exterior Wind Velocity: |
29 mph (13 m/s) |
| Rainfall Rate: |
3" (75 mm)/hr |
| Effectiveness: |
99.8% |
| Core Ventilation: |
763 fpm (3.9 m/s) |
| Exterior Wind Velocity: |
50 mph (22 m/s) |
| Rainfall Rate: |
8" (200 mm)/hr |
| Effectiveness: |
99.2% |
| Core Ventilation: |
676 fpm (3.4 m/s) |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF) (DWG)
SCV602X is a vertical blade, Storm Class louver that is certified by Underwriter's Laboratory under ASTM E 330, Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Uniform Static Air Pressure Difference, to comply with the requirements of the Florida Building Code. (Florida Product Approval No.: FL7708.4; UL Classified: R25376)
 |
Material: |
Extruded
Aluminum, Alloy 6063-T5
|
| Louver Depth: |
6”
(152.4 mm)
|
| Blade: |
0.081”
(2.06 mm)
|
| Frame: |
0.081”
(2.06 mm)
|
| Test Standard: |
AMCA Standard 500-L |
| Water Penetration Test: |
Wind Driven Rain |
| Blade Angle: |
35º
|
| Free Area - 4 ft. x 4 ft. unit: |
5.88
ft² (0.55 m²)
|
| Percent Free Area: |
37% |
| Beginning Point of Water Penetration: |
1,250
fpm (6.35 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
7,350
cfm (3.47 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.12
in. H2O (0.030 kPa)
|
| |
|
| Wind Driven Water Penetration Test
|
| Exterior Wind Velocity: |
29 mph (13 m/s) |
| Rainfall Rate: |
3" (75 mm)/hr |
| Effectiveness: |
99.4% |
| Core Ventilation: |
693 fpm (3.5 m/s) |
| Exterior Wind Velocity: |
50 mph (22 m/s) |
| Rainfall Rate: |
8" (200 mm)/hr |
| Effectiveness: |
99.1% |
| Core Ventilation: |
681 fpm (3.5 m/s) |
Maximum Qualified
Wind Design Load |
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF) (DWG)
T9106X is an acoustic louver certified by Underwriter's Laboratory under ASTM E 330, Standard Test Method for Structural Performace of Exterior Windows, Doors, Skylights, and Curtain Walls by Uniform Static Air Pressure Difference, to comply with the requirements of the Florida Building Code. (Florida Product Approval No.: FL7708.5; UL Classified: R25376)
 |
Material: |
Aluminum, Alloy 3003-H32
|
| Accoustic Material: |
Fiberglass |
| Louver Depth: |
6” (152.4 mm)
|
| Blade: |
0.080” (2.03 mm)/18 gauge
|
| Frame: |
0.080” (2.03 mm)/16 gauge
|
| Blade Angle: |
45° |
| Test Standard: |
AMCA Standard 500-L
|
| Free Area - 4 ft. x 4 ft. unit: |
4.89 ft² (0.45 m²)
|
| Percent Free Area: |
31%
|
| Beginning Point of Water Penetration: |
799 fpm (4.06 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
3,907 cfm (1.84 m³/s) |
Pressure Drop at
Beginning Point of Water Penetration: |
0.060 in. H2O (0.015 kPa)
|
Maximum Qualified
Wind Design Load |
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF) (DWG)
Downloadable Airolite Literature:
All Products Brochure (Sweets)
Corporate Brochure
You will need the free Acrobat Reader to view and print PDF documents. Click here to download a copy.
|
|
