|
Airolite’s Narrow Profile louvers are versatile architectural louvers designed for applications that require intake and exhaust ventilation with little concern for water penetration. Narrow Profile louvers are available with visible and concealed vertical mullions, in a frameless configuration and range in frame depths from 1 ½ to 2-inches.
AC420/CB420/AC420S is an architectural louver suitable for applications where high free area is required to support maximum air volume flow rates and weather protection is not a concern. (AC420S is furnished with no perimeter frame.)
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
1 ½” (38.1 mm)
|
| Blade: |
0.063” (1.60 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
52º
|
| Free Area - 4 ft. x 4 ft. unit: |
7.40 ft² (0.69 m²) |
| Percent Free Area: |
46% |
| Beginning Point of Water Penetration: |
not rated |
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
not rated |
Pressure Drop at
Beginning Point of Water Penetration: |
not rated |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
AC460/CB460/AC460S is an architectural louver designed for applications that require intake and exhaust ventilation and high free area, with little concern for water penetration.(AC4605 is furnished with no perimeter frame.)
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
1 ½” (38.1 mm)
|
| Blade: |
0.063” (1.60 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
30º
|
| Free Area - 4 ft. x 4 ft. unit: |
10.95 ft² (1.06 m²)
|
| Percent Free Area: |
71% |
| Beginning Point of Water Penetration: |
not rated |
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
not rated |
Pressure Drop at
Beginning Point of Water Penetration: |
not rated |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
AC505/CB505 is an architectural louver suitable for applications where optimum free area is required to support maximum air volume flow rates and weather protection is not a concern.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
1 ½” (38.1 mm)
|
| Blade: |
0.125” (3.20 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
30º
|
| Free Area - 4 ft. x 4 ft. unit: |
10.92 ft² (1.01 m²)
|
| Percent Free Area: |
68% |
| Beginning Point of Water Penetration: |
not rated |
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
not rated |
Pressure Drop at
Beginning Point of Water Penetration: |
not rated |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
AC507/CB507 is a an architectural louver suitable for applications where optimum free area is required to support maximum air volume flow rates and weather protection is not a concern.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
1 ½” (38.1 mm)
|
| Blade: |
0.081” (2.06 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
7º
|
| Free Area - 4 ft. x 4 ft. unit: |
11.07 ft² (1.03 m²)
|
| Percent Free Area: |
69% |
| Beginning Point of Water Penetration: |
not rated |
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
not rated |
Pressure Drop at
Beginning Point of Water Penetration: |
not rated |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
K6772 is a drainable louver suitable for applications with narrow or short openings that require greater free area than a four or six-inch deep louver can provide and where weather protection is not a concern.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
2” (50.8 mm)
|
| Blade: |
0.063” (1.60 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
45º
|
| Test Standard: |
AMCA Standard 500-L
|
| Free Area - 4 ft. x 4 ft. unit: |
9.04 ft² (0.84 m²)
|
| Percent Free Area: |
57% |
| Beginning Point of Water Penetration: |
886 fpm (4.50 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
8,009 cfm (3.78 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.10 in. H2O (0.025 kPa)
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
T608/CB608 is an architectural louver suitable for applications with narrow or short openings that require greater free area than a four or six-inch deep louver can provide and where weather protection is not a concern.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
2” (50.8 mm)
|
| Blade: |
0.081” (2.06 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
45º
|
| Free Area - 4 ft. x 4 ft. unit: |
5.28 ft² (0.49 m²)
|
| Percent Free Area: |
33% |
| Beginning Point of Water Penetration: |
not rated |
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
not rated |
Pressure Drop at
Beginning Point of Water Penetration: |
not rated |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
T60915/CB60915 is an architectural louver suitable for applications with narrow or short openings that require greater free area than a four or six-inch deep louver can provide and weather protection is not a concern.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
1 ½” (38.1 mm)
|
| Blade: |
0.063” (1.60 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
45º
|
| Free Area - 4 ft. x 4 ft. unit: |
6.08 ft² (0.57 m²) |
| Percent Free Area: |
38%
|
| Beginning Point of Water Penetration: |
not rated |
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
not rated |
Pressure Drop at
Beginning Point of Water Penetration: |
not rated |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
T63815/CB63815 is a versatile, horizontal blade architectural grille suitable for applications with narrow or short opening that require greater free area than a four or six-inch deep louver can provide and weather protection is not a concern.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
1.5” (38.1 mm)
|
| Blade: |
0.063” (1.60 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
30º
|
| Free Area - 4 ft. x 4 ft. unit: |
7.29 ft² (0.68 m²)
|
| Percent Free Area: |
46% |
| Beginning Point of Water Penetration: |
not rated |
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
not rated |
Pressure Drop at
Beginning Point of Water Penetration: |
not rated |
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
T6482/CB6482 is an architectural louver suitable for applications with narrow or short openings that require greater free area than a four or six-inch deep louver can provide and weather protection is not a concern.
 |
Material: |
Extruded Aluminum, Alloy 6063-T5
|
| Louver Depth: |
2” (50.8 mm)
|
| Blade: |
0.063” (1.60 mm)
|
| Frame: |
0.063” (1.60 mm)
|
| Blade Angle: |
37º
|
| Test Standard: |
AMCA Standard 500-L
|
| Free Area - 4 ft. x 4 ft. unit: |
6.01 ft² (0.56 m²)
|
| Percent Free Area: |
38%
|
| Beginning Point of Water Penetration: |
668 fpm (3.39 m/s)
|
Air Volume Flow Rate at
Beginning Point of Water Penetration: |
4,014 cfm (1.89 m³/s)
|
Pressure Drop at
Beginning Point of Water Penetration: |
0.06 in. H2O (0.015 kPa)
|
Product Submittal (PDF); Specification Document (PDF); AutoCAD Drawing (PDF)
(DWG)
Downloadable Airolite Literature:
All Products Brochure (Sweets)
Corporate Brochure
You will need the free Acrobat Reader to view and print PDF documents. Click here to download a copy.
|
